Key features of personal VOC monitors for contamination mapping

06.08.26 08:17 AM By Amelia - Comment(s)
Personal VOC monitors must deliver high-resolution, defensible data that supports modelling, regulatory assessment, and operational decision-making.

VPro Benzene Monitor Applications: Oil and Gas

29.07.26 07:37 AM By Amelia - Comment(s)
The VPro benzene is unique solution for a range of applications. Here we talk about when and why it is used in the Oil and Gas Industry. Find out more here.

Why choose a VOC Gas Monitor that can measure Benzene?

24.07.26 08:08 AM By Amelia - Comment(s)
While many VOC gas monitors provide a total VOC reading, instruments capable of directly measuring benzene offer a far higher level of safety insight.

New Product: VPro Benzene Gas Detector

21.07.26 09:47 AM By Amelia - Comment(s)
Our latest product, the VPro benzene gas detector, is now available to order from Senko Europe. This new device provides an essential high quality, low cost solution for applications with Benzene hazards.

Your Gas Detection Guide for Safe Working in Confined Spaces

05.06.26 09:09 AM By Amelia - Comment(s)
Our gas detection guide offers insights about safe working in confined spaces, covering hazards, pre-entry testing, continuous monitoring, and alarm response.

Using a VOC Gas Monitor for Accelerant Detection

14.04.26 11:50 AM By Amelia - Comment(s)
A Volatile Organic Compound (VOC) gas monitor provides the resolution and sensitivity required to identify these hazards at very low concentrations.

A Portable Gas Monitor Checklist for Power Substation Entries

10.03.26 09:20 AM By Amelia - Comment(s)
This guide outlines a portable gas monitor checklist tailored for electrical substations, helping technicians maintain compliance, operational integrity, and, most importantly, personal safety.

Disposable gas detectors: Pros, cons, and use cases in field work

08.12.25 05:14 PM By Amelia - Comment(s)
Click here to read our article and learn all about disposable gas detectors, including their pros, cons, and use cases in field work.

What are the most common VOC gases in industry?

06.10.25 12:16 PM By Amelia - Comment(s)
Understanding the gases you are encountering is vital. It will help you to behave in the correct way, as well as implement the right safety measures for your gas type. This blogs summarises the features and dangers of the most common VOC gases found in industry.

What is a VOC Sensor and why would I need one?

03.09.25 09:24 AM By Amelia - Comment(s)
Our new product, the VPro VOC sensor is now available! VOC sensors are unique products that provide different capabilities for a wide range of industries. Check out this blog to find out more about what a VOC sensor is and why you might need one

Single gas detector for PH3, HCL, HCN and CL2

06.08.25 11:42 AM By Amelia - Comment(s)

The recent additions to the SGT-P product range extends the product capability, providing high quality, low cost safety to an even wider range of industries. HCN, PH3, CL2 and HCL are all very exotic gas hazards and aren’t commonly found or thought of in industry. However, each is very hazardous for...

Pumped Multi Gas Detector Top Applications

16.07.25 01:50 PM By Amelia - Comment(s)

The Senko portfolio contains a wide range of products for hundreds of applications, with some products more frequently used than others. One of our more widely applicable singular products is the MGT Pump. With over 35 gas combinations available and up to 6 gas sensors in one device, the MGT Pump is...

Duo Tracer Application Highlight: O2 and H2 Detection

31.10.24 10:56 AM By Amelia - Comment(s)

In our final application highlight, we are going to be looking at new and mysterious industry of the Hydrogen economy.

 

Why do you need O2 and H2 detection in the Hydrogen economy?


The Hydrogen economy is being developed worldwide as a green energy substitution as we move towards net zero. As Hyd...

Duo Tracer Application Highlight: O2 and NH3 Detection

24.10.24 11:06 AM By Amelia - Comment(s)

For the fourth week of our application highlight series, we are cooling down and diving into O2 and NH3 Detection for refrigeration, from food to pharmaceuticals.

 

Why do you need O2 and NH3 Detection in refrigeration?

  

NH3 is becoming more and more frequently used in industrial refrig...

Duo Tracer Application Highlight: O2 and CO detection

17.10.24 10:19 AM By Amelia - Comment(s)

For the third week of our application highlight series, we are going to be switching industries and discussing the protection of Boiler Engineers using O2 and CO detection in the form of the Duo tracer.

 

Why do Boiler Engineers need O2 and CO Detection?


As we all know, boilers across the world ar...

Next