SENKO Europe
Portable and Fixed Gas Detectors helping to keep you safe
High Quality | Low Cost | Gas Detection
Made in South Korea
Portable Gas Detectors
SGT Disposable Personal Monitor
SGT is a two year disposable single gas personal monitor. Compact and lightweight it offers a very affordable way to provide personal protection against the hazards posed by hydrogen sulphide, carbon monoxide, ammonia, nitrogen dioxide, hydrogen, sulphur dioxide and oxygen deficiency and enrichment.
The device operates continuously for two years with minimal maintenance. It is ideal for use in environments where these dangerous gases can occur to provide a simple and effective way to warn people of an impending change in the atmosphere.
It is ATEX and CE approved.
For more information Contact Us
SGT-P Personal Monitor
SGT P is a full service personal monitor, available to detect hydrogen sulphide, carbon monoxide, ammonia, nitrogen dioxide, hydrogen, sulphur dioxide and oxygen deficiency and enrichment. It is fully maintainable with replaceable battery and sensor, but has the size and weight of a disposable monitor. This makes the SGT P the most cost effective personal monitor available.
It contains an on board datalogger and is fully configurable using the IR Link and software.
It is ATEX and CE approved.
For more information Contact Us
iGas CO2 Personal Monitor
IGas is a low cost high quality infra red based carbon dioxide detector. Its highly efficient li-Ion rechargeable battery provides a run time of up to 14 days from a single charge, and the simple USB based charging system means recharging on the go is easy.
IGas contains an onboard datalogger and is fully configurable using its own dedicated software through the USB charging link. Lightweight, durable and affordable, iGas is the ideal way top protect people from the dangers of CO2.
It is CE approved.
For more information Contact Us
MGT-P Four Gas Monitor
MGT P is a three sensor/four channel multi gas detector. It will detect Flammable gases (using a catalytic pellistor sensor), hydrogen sulphide, carbon monoxide and oxygen deficiency and enrichment. Its highly efficient li-Ion rechargeable battery provides a run time of up to 20 hours from a single charge, and a range of recharging options are available such as multi charging stations and in vehicle chargers.
The MGT P is durable, lightweight and simple to use making it a simple and affordable way to detect gases in many industrial environments, including confined spaces.
It is ATEX and CE approved.
For more information Contact UsMGT-N Four Gas Monitor
MGT N is a three sensor/four channel multi gas detector. It will detect methane (using an infra red sensor), hydrogen sulphide, carbon monoxide and oxygen deficiency and enrichment. Its highly efficient li-Ion rechargeable battery provides a run time of up to 20 hours from a single charge, and a range of recharging options are available such as multi charging stations and in vehicle chargers.
The MGT P is durable, lightweight and simple to use making it a simple and affordable way to detect gases in many industrial environments, including confined spaces.
It is ATEX and CE approved.
For more information Contact Us
MGT Pump
The MGT Pump is a sampling type detector with a strong internal pump drawing a sample over the sensors. By cleverly combining the use of dual infra red and dual toxic sensors with catalytic pellistors, PID and electrochemical sensors the MGT Pump is able to detect up to six different gas types and deliver over 37 different combinations of sensors.
The internal pump can run for up to 5 days on a single charge, and the onboard event log will record all the events, calibrations and bump tests which occur.
At just 400g the MGT Pump is lightweight and easy to use. With an IP 67 rating and full ATEX approvals the MGT Pump is durable, flexible and above all very competitively priced.
For more information Contact Us
DuoTracer Personal Dual Gas Detector
The DuoTracer is a state-of-the-art portable gas detector designed to ensure safety in hazardous environments. The DuoTracer simultaneously monitors and displays the concentration of two gases, including oxygen, explosive, or toxic gases, ensuring comprehensive safety coverage. Using the advanced diffusion method, it accurately monitors and alerts you to dangerous gas concentrations.
The DuoTracer supports wireless setting modifications and data download via Bluetooth and Senko IR-LINK.
It is ATEX and CE approved.
For more information Contact Us
VPro Personal VOC Monitor
The VPro is a single gas detection unit detecting VOC gases. With a built in pump, the VPro is ideal for conducting pre entry checks making sure areas are safe before entry. The VPro is fully maintainable with vibration, visual and audible alarms.
The device is ATEX and CE approved and is compatible with the IR link.
For more information Contact Us
VPro Benzene Personal Monitor
The VPro is a single gas detection unit specified for detecting Benzene. With a built in pump, the VPro is ideal for conducting pre entry checks making sure areas are safe before entry. The VPro is fully maintainable with vibration, visual and audible alarms.
The device is ATEX and CE approved and is compatible with the IR link.
For more information Contact UsFixed Gas Detectors
SI-200E
The SI-200E is the next-generation of fixed gas detection, offering enhanced durability, advanced detection technology, explosion-proof certification, and multiple communication options. SI-200E supports multiple communication interfaces like 4-20mA output and RS-485, allowing it to integrate seamlessly with external systems. This enables real-time monitoring and control through central systems providing reliable performance in harsh and hazardous industrial environments. It has a wireless communication function so the user can transfer the measuring data to their mobile devices.
It is ATEX, IECEx and CE approved.
For more information Contact Us
SI-100C
SI-100C is a simple, low cost, blind fixed gas detector. It provides a 4-20mA signal and is certified for use in ATEX zone 1 and 2. It can be supplied with sensors for Flammable gases (Catalytic), hydrogen sulphide, carbon monoxide, hydrogen, ammonia, methane (infra red) nitrogen dioxide and oxygen.
It is CE approved.
For more information Contact Us
SI-301
The SI-301 is an ATEX rates sampling type gas detector. The device measures through a sensor cartridge on a real time basis. The SI-301 detects gases with a flammable, toxic and suffocation hazards and is ideal for semiconductor and industrial sites. The measured gas concentration is transmitted in real time with an output of 4-10 mA and can be configured through internal relays.
For more information Contact Us
SI-H100
SI-H100 is a sampling type Gas Detector which continuously draws a gas sample to a sensor cartridge whereupon the measurement is made. It is ideal for difficult to access areas or areas which are especially dangerous. The measured gas concentration is transmitted with 4-20mA output on a real time basis and the detector also has three internal relays. In addition, it is possible to output MODBUS/TCP. It can be supplied with sensors for Flammable gases (Catalytic), hydrogen sulphide, carbon monoxide, hydrogen, ammonia, sulphur dioxide, methane (infra red), Pentane (infra red), nitrogen dioxide, carbon dioxide (infra red), hydrogen chloride, Phosphine, Silane, Boron Trichloride, VOC (PID), hydrogen peroxide, hydrogen fluoride, and oxygen.
It is CE approved.
For more information Contact Us
SI-100 IS
SI-100 IS is a simple low cost single channel panel. Ideal for interfacing with SI-100C it takes a 4-20mA input and provides a display and relay contacts for triggering alarms. Exceptionally simple to install, configure and run it is the ideal base for a simple fixed gas system.
It is CE approved.
For more information Contact Us
SI-200I
SI200I is a self contained wall mounted single channel gas detection panel, with extras! It has a large local display and local 4-20mA, relay and RS485 outputs for driving other devices, but also contains its own ultra bright beacon and local alarm sounder.
It has an onboard battery for uninterrupted operation and a durable IP65 case to ensure protection. It is easy to install, configure and run and will interface with any 4-20mA gas detector to provide a flexible but low cost gas detection solution.
It is CE approved.
For more information Contact Us
SI-200IS
The SI-200IS is a single channel control panel and an alarm display with a builtin gas sensor and receiver. It is designed with 4-digit FND display and features a large waring light and buzzer.
For more information Contact UsAccessories
MGT Carry Case
The carry case is made from orange leather and provides extra protection for the MGT models when in use. It has an integrated belt loop and space for the use of the crocodile clip to enable multiple wearing options.
For more information Contact Us
MGT Docking Station II
The MGT Docking station II provides a simple and automatic way to bump test, calibrate and download data for up to four MGT devices simultaneously. Self contained in its own case, containing also the multi gas cylinder (purchased separately) the MGT Docking station II carries out all the required maintenance for the MGT whilst you do something more interesting and useful.
It is CE approved.
For more information Contact Us
MGT Single Dock
The MGT single dock provides a simple and automatic way to bump test, calibrate and download data for a single MGT. Self contained in its own case, the MGT single Dock carries out all the required maintenance for the MGT whilst you do something more interesting and useful.
It is CE approved.
For more information Contact Us
MGT 5 Way Charger
The MGT 5 way charger is a charging dock holding up to 5 MGTs and charging them simultaneously.
It is CE approved.
For more information Contact Us
MGT Multi Way Charger
The multiway charger provides 7 points of charge on a single power supply. These are provided using 7 flying leads from a single socket.
It is CE approved.
For more information Contact Us
MGT Vehicle Charger
This simple low cost adapter enables the MGT to be charged on the move using the vehicle power socket.
It is CE approved.
For more information Contact Us
IR Link
The IR Link enables communication with both the SGT/SGTP and MGT ranges of portable products. Using the free of charge IR Link software the Link connects quickly and easily with the devices providing the simplest way to configure, test, calibrate and download the instruments.
It is CE approved.
For more information Contact Us
SGT Docking Station II
The SGT Docking station II provides a simple and automatic way to bump test, calibrate and download data for up to four SGT or SGT P devices simultaneously. Self contained in its own case, containing also the multi gas cylinder (purchased separately) the SGT Docking station II carries out all the required maintenance for the SGT or SGT P whilst you do something more interesting and useful.
It is CE approved.
For more information Contact Us